Automotive gear oils
DURAGEAR GL-1
SAE 90/140
GL-1
DURAGEAR GL-1 GEAR OIL SAE 90/140 is a gear oil of GL-1 performance level specially recommended for automatic and manual transmissions .
ADVANTAGES :
• Good film strength protects against metal to metal contact and ensures proper lubrication of gear teeth .
• Effective protection against rust and is non corrosive to copper and non-ferrous alloys .
• Low pour point assures positive lubrication during start up and in cold weather .
• High viscosity index prevents excessive thinning of the lubricant at high temperatures and ensures effective lubrication over a wide temperature range .
• Effective foam suppressant .
TYPICAL CHARACTERISTICS:
Test | Method | 90 | 140 |
Kinematic Viscosity @ 100ºC, cSt | ASTM D445 | 22 | 32 |
Kinematic Viscosity @ 40ºC, cSt | ASTM D445 | 328 | 600 |
Viscosity Index | ASTM D2270 | 90 | 90 |
Flash Point, ºC | ASTM D92 | 260 | 260 |
Pour Point, ºC | ASTM D97 | - 9 | - 9 |
Metal Content (Ca,Mg,Zn), %wt | ASTM D4628 | 0.02 | 0.02 |
Water Content, % volume | ASTM D95 | 0.00 | 0.00 |
Density @ 15.6ºC, Kg/l | ASTM D1298 | 0.90 | 0.91 |
Color | ASTM D1500 | L5.0 | L5.0 |
The above characteristics are average values based on recent production. Minor variations which do not affect product performance are to be expected in normal manufacture.
PACKING: 4 liters bottle, 18 liters pail and 200 liters steel or plastic drum
APPLICATION:
DURAGEAR GL-1 GEAR OIL SAE 90 is normally suited as a gear oil providing full and immediate lubrication from cold starts and minimum associated power losses .
DURAGEAR GL-1 GEAR OIL SAE 140 is recommended when a heavier gear oil is required or where operating temperatures are higher than normal .
SAFETY AND ENVIRONMENT:
Avoid prolonged or repeated skin contact with all used motor oil. Thoroughly wash exposed areas with soap and water. Do not discharge used engine oils into drains.