Metal Working Oils

DURAPOWER ACTIVE SULFUR CUTTING OILS

A 10/20/30/40

DURAPOWER ACTIVE SULFUR CUTTING OILS are specially formulated for a wide range machining operations with different extreme pressure requirements, where active oils are required and the advantages of transparent oils are desired. They have a wide range of viscosities and additive levels for individualized applications.

 ADVANTAGES :

·Transparent characteristic permitting a full view of the work.

·Provide excellent cooling and lubrication in a wide range of machining operations.

·High flash points help prevent smoking in service.

·Dramatically reduce oil mist in high-speed machine tools.

 TYPICAL CHARACTERISTICS:

The above characteristics are average values based on recent production. Minor variations which do not affect product performance are to be expected in normal manufacture.

PACKING: 18 liters , 200 liters steel or plastic drum.

 APPLICATION:

DURAPOWER ACTIVE SULFUR CUTTING OILS are recommended for machining tough ferrous alloys as well as mild steel , cast iron and all steels including low and medium carbon as well as nickel and chrome alloy types in such operations as milling, drilling, turning, grinding, broaching, thread cutting and tapping.
Active Sulfur @150 oC,%wt,min.: A 10/1.7 A 20/0.7 A 30/1.0 A 40/1.7

·A 10 is highly active and has low viscosity for severe operations such as deep hole drilling where good chip flushing is needed.

·A 20 has low additive and medium viscosity for mild general machining operations.

·A 30 has medium additive and medium viscosity for medium-to low-machinability steel and titanium. It is also a good form- and thread-grinding oil for hard steels.

·A 40 is highly active and has high viscosity for use on steels with the most difficult machinability , e.g. all types of stainless and heat-resistant steels. It can also be used in severe machining operations, such as gear shaping and internal broaching. Excellent form- and thread-grinding oil for the soft ,tough, or stringy steel alloys.

·Since they contain a large amount of active sulfur , these oils are not recommended for machining cooper, brass or aluminum due to potential staining problems.

 SAFETY AND ENVIRONMENT:

Avoid prolonged or repeated skin contact with all used motor oil. Thoroughly wash exposed areas with soap and water. Do not discharge used engine oils into drains.