Automotive specialty products
INDOPETROL BRAKE FLUID DOT 4
DOT 4
INDOPETROL BRAKE FLUID DOT 4 is high performance brake fluid based on Polyethylene Glycol ether .It is designed for use in all disc and drum brake and clutch systems .
ADVANTAGES :
• Provide good braking effect in different temperatures .
• High boiling point ensures absolute safety under high temperature operation, exceeds requirements of modern vehicles.
• Good lubricating and anti-wear properties.
• Compatible with rubber components and so prevents damage to gaskets and seals
• Extend long life by the good chemical stability .
TYPICAL CHARACTERISTICS:
DOT 4 | ||
Kinematic Viscosity @ 100ºC, cSt | ASTM D445 | 2.2 |
Flash Point, ºC | ASTM D92 | 120 |
Pour Point, ºC | ASTM D97 | -40 |
pH value | FMVSS.116 | 7.5 -11.0 |
Boiling Point ,ºC (Dry) | FMVSS.116 | 250 |
The above characteristics are average values based on recent production. Minor variations which do not affect product performance are to be expected in normal manufacture.
PACKING: 1 liter bottle, 200 liters drum
APPLICATION:
INDOPETROL BRAKE FLUID DOT 4 meets the requirements of U.S. Federal Motor Vehicle Standard (FMVSS) No. 116 grade DOT 4 & DOT3, SAE J1703 and technical specifications of ISO 4925 . It is recommended for automotive drum and disc hydraulic brake systems where DOT 4 is required , operating under average condition . It can be added to all systems using DOT 4 & DOT 3 or SAE J1703 JUN 90 .
Do not mix Brake Fluid DOT 4 with any mineral oil (Hydraulic Oil, …) or water and keep braking system clean, oil free and dry .
SAFETY AND ENVIRONMENT:
Keep out of reach of children and avoid contact with eyes . Do not discharge used brake fluid into drains .